German Press Fit Carriage Clock Movement By UTS (9mm Shaft)

German Carriage Clock Quartz Movement

Please read all of the information in the description below carefully to ensure the movement will be an appropriate fit prior to purchasing.

The micro press fit shaft movement by UTS has a total shaft length of 9mm and is compatible with carriage clocks that have a dial thickness between 0-2mm.

Please Note: Micro bore hands are required with this movement but are not included. They are currently not available to purchase, this is a replacement movement only.

Important note: We cannot guarantee compatibility between your existing hands and our movements. To avoid any issues, be sure to gather accurate hand hole measurements, and verify that they match the exact specifications outlined in this description. Please read the entire description thoroughly to ensure all measurements will work with this movement.

Supplied With:

1 x German press fit carriage clock movement movement by UTS (9mm shaft length, suits carriage clocks with a dial thickness 0-2mm)

Micro press fit shaft (both hands will push on- measured from the face of the movement to the very end of the shaft)

Movement measures 56 x 56 x 17mm (not including shaft length)

1 x Pack of fittings (rubber washer, centre fixing nut & clock hanger) (colour of fittings may vary from images)

Requires 1 x AA Alkaline battery (or LR6 Alkaline), not included

We recommend changing your movement battery once a year using a high quality alkaline battery, such as Duracell or Panasonic.

Hand Hole Dimensions (Collet)

• Minute: Ø2.0mm
• Hour: Ø3.5mm